IUPAC

International Union of Pure and Applied Chemistry

New site in test period

If you experience a problem,
you may use the old site »

Last update: 16 November 2009

Members by: name | institution | city | country

Member

Dr. Dick J. Dijkstra

Company:	Bayer MaterialScience, AG
Department:	BMS-CAS-INN-PH
Address:	Building Q23, Room 403 Leverkusen-Bayerwerk D-51368
Country:	Germany
Phone:	+49 214 305 8368
Fax:	+49 214 308 2896
Email:	dick.dijkstra@bayermaterialscience.com

Body membership

Subcommittee on Structure and Properties of Commercial Polymers (Chair)
Polymer Division (National Representative)

Task group membership

member: Project No. 2008-028-1-400: Elongational rheometry devices for shear rheometers
member: Project No. 2007-004-1-400: Guidelines for shear rheometer calibration and performance check
member: Project No. 2005-023-2-400: Micro-structural, melt processing and mechanical properties of compatibilised PA 6/ABS -blends
member: Project No. 2003-038-4-400: Structure and properties of linear and crosslinked structural PVC foams
chairman: Project No. 2004-009-1-400: Guideline for rheological characterization of polyamide melts
member: Project No. 2003-051-1-400: Structure and properties of polymer/clay nano-composite materials
member: Project No. 2003-009-1-400: Recommendations for data presentation and storage applicable to mechanical and rheological measurements of polymers
member: Project No. 1999-020-1-400: Quantifying scratch resistance of commercial polymers